Engine Bay Detail
+$60
Engine bays accumulate years of grease, oil residue, road grime, and leaf debris that mask oil leaks, accelerate corrosion on metal components, and retain heat in tight spaces. This service applies a dedicated degreaser with soft-brush agitation to break down and lift built-up contamination, followed by a controlled low-pressure rinse with all sensitive electronics masked. Plastics, hoses, and covers are dressed with a non-greasy protectant to restore their appearance and reduce future contamination buildup.
When You Need This
Add an engine bay detail when your engine bay looks visibly greasy or neglected, especially before selling a vehicle — a clean bay signals careful ownership and makes it easier for a buyer's mechanic to inspect. It is also a smart step after purchasing a used vehicle to start fresh and make new oil leaks easy to spot against a clean surface. Schedule this when the engine has had time to cool, and avoid booking it the day before heavy rain.
What's Involved
- 1.Confirm the engine is cool to the touch before starting — hot surfaces flash-dry cleaners and can damage plastic components.
- 2.Mask sensitive electrical components, the air intake, and the alternator with plastic bags or tape.
- 3.Apply a dedicated engine degreaser to all surfaces and allow 3–5 minutes of dwell time to break down grease and oil deposits.
- 4.Agitate with soft-bristle brushes of varying sizes to loosen contamination from crevices, hose clamps, and brackets.
- 5.Rinse with low-pressure water, directing flow away from masked electrical connections, and use compressed air to clear standing water from recesses.
- 6.Apply a non-greasy plastic and rubber dressing to all hoses, covers, and trim pieces once dry.
Frequently Asked Questions
Pair This With a Full Service
Auto Detailing
Full interior and exterior detail restoring your vehicle to showroom condition.
View Service →Other Upgrades to Consider
Clay Bar Treatment
+$50
A polymer clay bar glides across lubricated paint and physically shears off bonded contaminants — brake dust, rail dust, and industrial fallout — that washing alone cannot remove.
Learn More →Chrome & Metal Polish
+$75
Metal polishing compounds cut through oxidation, water spots, and surface rust on chrome bumpers, exhaust tips, grilles, and bare metal trim to restore a mirror-like reflective finish.
Learn More →Glass Polish
+$125
Cerium oxide compounds dissolve etched mineral deposits and buff out wiper scratches from all glass surfaces, then a hydrophobic treatment is applied to repel water and reduce glare.
Learn More →Ready to Add This to Your Booking?
Mention this when booking and Gabe will include it with your service.