Glass Polish
+$125
Hard water deposits, environmental fallout, and worn wiper blades leave etched mineral stains and fine scratches in automotive glass that no glass cleaner can remove — they require abrasive polishing. This service uses cerium oxide-based compounds, the same material used in optical glass finishing, to gently abrade and dissolve these contaminants at a microscopic level and restore factory clarity. After polishing, a hydrophobic glass sealant is applied to all exterior glass to repel water, reduce nighttime glare from oncoming lights, and keep the glass cleaner between washes.
When You Need This
Add glass polish if you have water spots that will not wipe off, hazy patches that reduce visibility in direct sun or at night, or light scratches from wiper blades dragging grit across the surface. It is an important preparatory step before a ceramic coating on glass, ensuring a clean, uncontaminated surface for proper bonding. It is also recommended after any paintwork that involved sanding or buffing, since polishing compounds can deposit residue on adjacent glass.
What's Involved
- 1.Mask surrounding paint and trim to protect against compound splatter during machine work.
- 2.Clean all glass surfaces with an automotive glass cleaner to remove loose contamination.
- 3.Apply a cerium oxide glass polish to a foam pad and work in overlapping passes at low machine speed, focusing on water-spotted and scratched areas.
- 4.Wipe away residue with a clean microfiber towel and inspect the glass in direct sunlight and from multiple angles for remaining defects.
- 5.Apply a hydrophobic glass sealant to all exterior glass surfaces for water-beading protection and improved clarity in rain.
Frequently Asked Questions
Pair This With a Full Service
Auto Detailing
Full interior and exterior detail restoring your vehicle to showroom condition.
View Service →
Other Upgrades to Consider
Clay Bar Treatment
+$50
A polymer clay bar glides across lubricated paint and physically shears off bonded contaminants — brake dust, rail dust, and industrial fallout — that washing alone cannot remove.
Learn More →Chrome & Metal Polish
+$75
Metal polishing compounds cut through oxidation, water spots, and surface rust on chrome bumpers, exhaust tips, grilles, and bare metal trim to restore a mirror-like reflective finish.
Learn More →Engine Bay Detail
+$60
Degreaser application and soft-brush agitation break down grease, oil residue, and grime buildup in the engine bay, followed by dressing of all rubber and plastic surfaces.
Learn More →Ready to Add This to Your Booking?
Mention this when booking and Gabe will include it with your service.